LXC container for lightweight remote access

I am running a lxc container for my access to the makerspace. here are the steps I took to stand up the lxc container. You can use this as a guide for standing up your own personal LXC container. you dont have to do tailscale on there but this has some info on securing the container. 1. login as root/PAM auth on the proxmox cluster 2. get to the shell on a particular system 3. run a proxmox convience script to standup a very basic ubuntu lxc container 4. once the container is stood up and running get into the root console and do the following 	 1. change password for root `passwd` to something secure and your own 	 2. modify system to prevent auto-login using the command below and remove the `--auto-login root` portion of the line that is there. nano /etc/systemd/system/container-getty@1.service.d/override.conf 	 3. reboot the container 	 4. login to your root user 	 5. run `wget https://github.com/YOUR-GITHUB-USERNAME.keys` to pull down your ssh keys 	 6. modify your /etc/ssh/sshd_config file to allow for root login via ssh 	 7. verify you can ssh to the system 	 8. modify system hostname using proxmox gui under container > DNS > hostname 	 9. reboot to apply hostname 	 10. once all that works install tailscale the normal way you do that on linux servers. 	 11. setup subnet routing 	 12. **TURN OFF SUBNET ROUTING ONCE IT WORKS** we should be using the wireguard VPN for access. this is a backup in the case the wireguard is acting up 5. once the system is configured, your backdoor now should work just fine. I recomend not going crazy with this system.