Skip to main content

2.0 Ricochet Access🎾

*BOB = placeholder name 

Create and Add SSH Keys to Github

  1. On user’s shell (i.e. cmd):

  • Just press Enter for the prompts

  • Make sure to note where the SSH keys are being stored 

      • ex) C:\Users\BOB/.ssh/

ssh-keygen

  1. Navigate to the .ssh folder

  2. Open the public key file (ends in .pub) in Notepad and copy just the key

  3. Generate a SSH key on user’s Github account 

  • Click on Github Profile > Settings > SSH and GPG keys > New SSH key

  1. Paste the public key into user’s Github profile

  • Title can be anything (should note what machine it belongs to)

  • Key type: Authentication Key

Edit SSH Config File

  1. Navigate to inside the .ssh folder on the user’s system

  • EX) C:\Users\BOB\.ssh

  1. Create a new file called “config” (unless it already exists) and edit it with Notepad 

  • Remove any file extension from the file (e.g. .txt)

  1. Enter the following:

Host pi-club-pve (can be changed to any name // this is what you SSH to later)
    HostName raspberrypiclub.org
    User BOB
    LocalForward 8006 192.168.1.18:8006
    Port 1666

  1. Save the file

Import User’s SSH key 

*BOB = placeholder name

  1. In the sys-admin’s shell, ssh into your own ricochet and then escalate to superuser:

sudo su -

  1. Add the new user and then add them to sudoers group:

sudo su adduser BOB
sudo usermod -aG sudo BOB

  1. Change to the user:

sudo su BOB -

  1. Import the user’s github keys so they can ssh into their ricochet on their computer:

  • If any new SSH keys from other devices are added, this command needs to be done again

ssh-import-id-gh [BOB GITHUB USERNAME]

Connecting to Machine From Remote Device 

Gather IP of target device

ip -br a

  In windows powershell, type the following command:

ssh BOB@x.x.x.x (x.x.x.x is the ip address that you gathered from the ip command)

Add New Proxmox User

  1. Click on Datacenter (PIClubCluster) > Users > Add

  • Allow user to set their own username and password

  • Appoint user into appropriate group

Accessing the Proxmox Server

  1. Open new shell (i.e. CMD) 

  2. Type in the following:

ssh [host] (the name in the C:\Users\BOB\.ssh config file // EX: ssh pi-club-pve)

  1. In a new browser, type in: localhost:8006

  2. Login with user’s username and password previously made

  • Make sure Realm: Proxmox VE authentication server

Back to top